product description
K2 MyStains
The K2 MyStains ceramic painting colors represent a first-class solution for coloring ceramic restorations. They have been specifically developed for use in dentistry and are characterized by high color stability and easy handling. The colors are available in a wide range of shades and can be individually mixed to achieve a perfect color match with the patient's natural teeth. Thus, Yeti-Dental's ceramic painting colors are a reliable choice for dental technicians who have the highest demands for the aesthetics of their restorations.
The new K2 MyStains allow for excellent painting, shading, and individualization of ceramics. The colors remain stable if mixed with the corresponding Structure Liquid, without running or changing the intended effect once applied.
K2 MyStains are suitable for all low-fusing or high-fusing ceramic veneers.
All ceramic stains can be mixed with either Glaze Standard Liquid or Structure Liquid. When mixed with Standard Liquid, they can also be used effectively in the humidor. To maintain the "stable" effect, mix with Structure Liquid on a glass plate to prevent the liquid from being absorbed and ensure precise consistency control.
For basic individualization of blanks (e.g., Bleach), there are four basic colors available for tinting them according to the corresponding tooth shade.
Recommendation:
Before painting, thinly coat the object with liquid on all sides.
The eleven colors are excellent for individual paintings, and they can be mixed together easily.
If the colors are too intense, they can be toned down and weakened in intensity using the glaze materials.
Usage with Structure Liquid
Ceramic stains mixed with Structure Liquid can be adjusted in consistency to achieve desired results. This allows the mixed materials to remain stable, prevent running, and maintain the intended effect once applied. For more significant individualizations, it is recommended to perform 2-3 firings to achieve controlled and precise results.
K2 MyStains must be mixed exclusively with the corresponding liquid. The use of water is strongly discouraged!
Contents of the set (388-0000): | |||
---|---|---|---|
Designation | Contents | Article number | |
ST-A | 2 g | 388-0001 | |
ST-B | 2 g | 388-0002 | |
ST-C | 2 g | 388-0003 | |
ST-D | 2 g | 388-0004 | |
ST-S1, white | 2 g | 388-0011 | |
ST-S2, honey | 2 g | 388-0012 | |
ST-S3, orange | 2 g | 388-0013 | |
ST-S4, beige | 2 g | 388-0014 | |
ST-S5, caramel | 2 g | 388-0015 | |
ST-S6, darkbrown | 2 g | 388-0016 | |
ST-S7, brickred | 2 g | 388-0017 | |
ST-S8, skyblue | 2 g | 388-0018 | |
ST-S9, grey | 2 g | 388-0019 | |
ST-S10, royalblue | 2 g | 388-0020 | |
ST-S11, illusion violet | 2 g | 388-0022 | |
Glaze Powder GL | 2 g | 388-01002 | |
Glaze Powder GL-F (fluorescent) | 2 g | 388-01012 | |
Glaze Standard Liquid GL | 50 ml | 388-0150 | |
Colors-Structure Liquid LL | 50 ml | 388-1150 |
Firing chart | |||||||
---|---|---|---|---|---|---|---|
Preheating time | Drying time | Raise of temp. | Vacuum | Firing temperature range | Holding time | Appearance | |
Low Fusing Ceramic (K2 LF) | 480°C | 4 min | 45°C/min | yes | 750°C - 770°C | 1 min | shiny |
High Fusing Ceramic (K2 HF) | 480°C | 4 min | 45°C/min | yes | 860°C - 880°C | 1 min | shiny |
Lithiumceramic (K2 Li) | 450°C | 4 min | 45°C/min | yes | 750°C - 780°C | 1 min | shiny |
Zirconceramic (K2 Zi) | 480°C | 4 min | 45°C/min | yes | 790°C - 810°C | 1 min | shiny |
Zirconium Dioxide (Blanks) | 450°C | 6 min | 45°C/min | yes | 850°C - 950°C | 1 min | shiny |
Lithium Disilicate (Blocs) | 450°C | 4 min | 45°C/min | yes | 730°C - 760°C | 1 min | shiny |
Downloads
Instruction manual | Flyer |