product description
K2 Zircon
K2 Zircon is a brilliant veneering ceramic with a high feldspar content.
As the colour and layering system is the same for all K2 materials, it is easy and efficient to use across all systems. The natural aesthetics of this ceramic are enhanced by modern fluorising ceramic materials, which ensure optimum colour rendering.
K2 Zircon has high stability, which makes layering quick and easy. The excellent CTE matching also gives you the certainty of always achieving the best results.
Shades overview
Firing instruction "Standard Zircon" | |||||||
| Preheating Temp. | Drying time | Raise of Temp | Vacuum | Final Temp. | Holding Time | Appearance | |
| Liner firing Frame Modifier* | 450°C / 842°F | 4 min | 55°C (131°F) / min | + | 800°C / 1472°F | 1 min | slightly shiny |
| 1st and 2nd Shoulder firing | 450°C / 842°F | 4 min | 45°C (113°F) / min | + | 860°C / 1508°F | 1 min | slightly shiny |
| 1. & 1. Dentin firing | 450°C / 842°F | 6 min | 45°C (113°F) / min | + | 820°C / 1508°F | 1 min | shiny |
| 2. Dentin firing | 45°C / 842°F | 6 min | 45°C (113°F) / min | + | 810°C / 1490°F | 1 min | shiny |
| Glaze firing | 480°C / 896°F | 4 min | 45°C (113°F) / min | - | 820°C / 1508°F | 1 min | shiny |
| Glaze firing with Glaze powder | 480°C / 896°F | 4 min | 45°C (113°F) / min | + | 790°C - 810°C / 1454°F - 1490°F | 1 min | shiny |
| Correction powder firing | 450°C / 842°F | 4 min | 45°C (113°F) / min | + | 700°C / 1292°F | 1 min | glänzend |
| *Firing Parameters are Guidelines and need to be adjusted to the situation of the furnace ! The right firing result is important ! The furnace has to be calibrated and a cleaning firing by max. Temperatur without Vacuum/ 5 Minutes has to be done ! | |||||||
| "Subject to change and errors excepted!" | |||||||
Downloads
Flyer |
| Manual Multi Language |